Graphics, sound and multimedia • Re: 60k hdmi to 120hz p1080
Everything works fine now. I bought geekpi raspberry pi 5 starter kit and a computerscreen AOC 240hz at Amazon.Now I run RPI 5 in 120hz. That's all good.SincerelyBob, SwedenStatistics: Posted by...
View ArticleGeneral discussion • Sdcard sanddisk pro extreme lasting!
Hi Pi users.How long, do you think, Sandisk Pro Extreme sdcard, with Raspberry pi os, have for lifespan?1 year, 2 year?Someone have some experience of it?Thanks in advanceBob, from SwedenStatistics:...
View ArticleClik here to view.
Graphics, sound and multimedia • Re: Raspberry Pi5 and VGA666
Thank youI see the boot and the desktop, very zoomed but it works.But if I launch retropie I have a black screenPost a picture of what you see.Sorry, can't support on your retropie questionI did a...
View ArticleGeneral • Re: Am I missing something on HSTX ?
It could be used to stream out massive amount of data, continuously, from other sources than RAM, ie GPIOs, which this processor is quite capable, GBytes/sStatistics: Posted by gmx — Wed Sep 25, 2024...
View ArticleClik here to view.
HATs and other add-ons • A case for rethinking Pi5 cooling
CAUTION: Long Read!Some current cool/uncool realities could probably be summed up, as follows: • The Raspberry Active Cooler features exceptional design, offering both superior cooling (when used w/o...
View ArticleTroubleshooting • Re: Cannot connect to Raspberry Pi 4 via SSH
That looks like the output from ifconfig on your Ubuntu PC, not RPi OS on a Pi; the device names are wrong for a Pi OS on a Pi. ifconfig on the PC will not tell you anything about a remote Pi on the...
View ArticleGeneral discussion • Re: Sdcard sanddisk pro extreme lasting!
Depends on how you use it. I've been running the same SD card in a Pi2B for years, but except for periodic updates, it doesn't get written to, so it's lifetime will probably extend into the indefinite...
View ArticleHATs and other add-ons • Re: A case for rethinking Pi5 cooling
i think you worry to much about temp60- is normal to function properly, 80 is throttle tempeven with nothing but a heatsink, it's fine.getting it cooler does nothing, doesn't improve performance, has...
View ArticleGeneral • Re: Changing ADC Vref on Pi Pico
I said: "You should always limit the input voltage between GND and any VDDs." in this context:I've also noticed that if I put a voltage above the reference voltage on another ADC pin then there's some...
View ArticleGeneral • Re: RPi Pico PWM Switch time
Bitbang just means using the GPIO to produce the pulses (coded in software, as opposed to using a peripheral). Since generally you're never signalling faster than 1200Hz == 833 us per output cycle, on...
View ArticleOther projects • How can I disable GPIO button presses while video is played?
I have this project where I am making a sort of space ship command panel for use in the kindergarten I work in, where I aim to integrate a Raspberry Pi in the kids' play. I use buttons to execute...
View ArticleOther projects • Re: Initiate commands through QR code/bar code with camera...
This will be used by kids down to 3 years old, so I need something simpler than that. I need to be able to just power up and have it running straight from the command line, completely offline, and...
View ArticleOther projects • Re: How can I disable GPIO button presses while video is...
How can I disable GPIO button presses while video is played?You don't. Instead you simply ignore GPIO button presses while a video is playing. That's basically what you are trying to do with the...
View ArticleRaspberry Pi OS • UART (pins 14 & 15) support in Raspbian 12
For the life of me, I can't figure out what they changed in Raspbian 12 (32 bit) on the model 3 B+.In Raspbian 11, I had to do the routine steps in raspi-config to enable the serial port and disable...
View ArticleAdvanced users • Re: ADATA SD620 external SSD: eject does not function properly
Mount it on your Windows system, share it as an SMB share, mount that on your Linux system.Statistics: Posted by DougieLawson — Thu Sep 26, 2024 10:44 pm
View ArticleHATs and other add-ons • Re: Waveshare 1.69 display and Raspberryt PI 5
Thanks for your response unfortunately it didnt help in my case.My project is to build a raspberry pi 5 connected to either of the following displays. (240x240, 240x280)ST7789ST7789V2ST7735I am trying...
View ArticleTroubleshooting • Re: WD Blue SN580 not detected with CM4
I updated the SN580's firmware from 281010WD to 281040WD with my Windows PC. It remains undetected in the CM4 system.I also tested a Sabrent Rocket NVMe4 1TB in the CM4 system and it was detected...
View ArticleBeginners • Re: Looking for a good screen with certain spec
You're unlikely to find HDMI display at that price as manufacturer has to have HDMI group membership at $10k a year plus royalties. Might be some DVI ones though, but I suspect most will be SPI.Ahh...
View ArticleRaspberry Pi OS • Re: UART (pins 14 & 15) support in Raspbian 12
Try using /dev/serial0. That should be a symlink to the correct uart device.Statistics: Posted by thagrol — Thu Sep 26, 2024 11:29 pm
View ArticleBeginners • Re: RP2040, min power consumption, run on CR2032
You are looking at a battery that has a capacity of 700mWh and you want to run a system for 48 hours. Therefore you need to limit your average power usage to 14mW. This seems--to me--to be unlikely to...
View Article