C/C++ • Re: C++: Linking failing on Pi 1 B+ for class members, but the same...
Does "mylibrary" use functions from "library1"? Have you tried changing the order of the libraries on the command line?From "g++ test.cpp -o test -llibrary1 -lmylibrary" to "g++ test.cpp -o test...
View ArticleNetworking and servers • Using a pi 3b+ as in-car 4g router / info unit.
Hey Everyone,Hope you're all having a great day!I am looking to create a simple info unit for my car. I am looking to use an Android Operating System running on my Raspberry Pi 3B+ to give it access...
View ArticleClik here to view.
Troubleshooting • Trouble Communicating With A CAN Network
The setup: 2X MCP2515 chips with ATA6561 transieverhttps://seengreat.com/wiki/82/dual-ch-can-haton a Raspberry Pi 5Trying to connect to a 2013 Ford Fusion through the radio node. The Pi is to replace...
View ArticleClik here to view.
Troubleshooting • Raspberry Pi 5 - Power supply in the car - 12V DC available...
Hello,I am struggling with powering Raspberry pi 5 from anything other than official AC -> DC 5V/5A power supply.My goal is to make RV control system, so I need this device to be powered from 12V...
View ArticleTroubleshooting • Unable to change wallpaper (Bookworm - RP 5)
I'm having trouble changing the default wallpaper from "Appearance Settings" it doesn't do anything when I select a different wallpaper. But I can change it from the terminal but it's not permanent as...
View ArticleClik here to view.
HATs and other add-ons • Re: Raspberry Pi M.2 HAT+ vs Xiwai M-Key PCIe SATA...
..Effect is this same Connect HDD, disconnect - nothing.Is posible to see somewhere in the logs whether Raspberry sees my M.2 HAT+ card?https://forums.raspberrypi.com/viewtopi ......
View ArticleMicroPython • Re: How to toggle (programmatically) a 5v DC fan using a Pico W?
You could start here:https://forum.core-electronics.com.au/t ... co-w/15778I found it with "Google".thanks, I didn't see that in my searches.https://www.instructables.com/Pico-Powe ......
View ArticleNetworking and servers • Re: Important networking tools no longer included in...
Hello all,so I just installed bookworm 64 bit headless on a 3b+ and was going through my usual install and setup routines and boy was I shocked when I hit host apple.com and the terminal was like...
View ArticleNetworking and servers • pi os and ipv6
HiGot a pi5 recently - using default pi os. ipv6 is enabled, I don't have it on my router and my ISP doesn't provide ipv6 native.I could setup ipv4 to ipv6 but I don't.Should I leave ipv6 enable or...
View ArticleAutomation, sensing and robotics • Re: Hook mini claw machine
Thank you so much @B.Goode for all clarifications.Statistics: Posted by youcef — Tue Jun 18, 2024 3:49 am
View ArticleTroubleshooting • Re: RaspberryPI errors during sudo apt update
You have network configuration problems:The error message "No route to host" is means the routing table does not contain a default gateway, the default gateway is invalid, or the default gateway is...
View ArticleNetworking and servers • Re: pi os and ipv6
i just leave it aloneyou can disable it in the network icon - advanced settings , select your connection , then edit connectionin the last tab , click on the drop down and select disablebe sure to...
View ArticleBeginners • Can't list installed libraries
I need to list the installed libraries on Raspberry Pi5. I get the following error when I use pip list command.Code: user@raspberrypi:~ $ pip listERROR: Exception:Traceback (most recent call last):...
View ArticleTroubleshooting • Re: Unable to change wallpaper (Bookworm - RP 5)
Nope, haven't deleted any. This happened after fresh installation of the OS. Same occurred to another SD card after flashing. Issue is, I can only change it from the terminal but after a reboot it...
View ArticleGeneral discussion • Re: RPi 5 as a desktop daily driver?
Interesting reading about Google Earth.I use Strava a lot and use the flyby tool that displays maps with cycle routes overlaid. Using Chromium (up to date)It is MUCH slower to load and render on the...
View ArticleHATs and other add-ons • build hat serial protocol pid
I am trying to figure out how to do pid speed control using the build hat serial protocol, using the built in pid on the build hat.there are a couple of things i am struggling with mode M1 is speed...
View ArticleGeneral • Re: Embedded Swift
Bump. Here are a couple more links for those who want to save time. Introductory blog post and vision post:Get Started with Embedded Swift on ARM and RISC-V...
View ArticleTroubleshooting • Re: Pi5, New PoE hat , LED Code 4-long-5-short
New to pi. Have an RPi5 with a wavshare poe hat. Pi seems to get power but flashes 4-long-5-short (which is better than the 4-long-3short fatal error I've seen others get on the 5... hopefully). It...
View ArticleCompute Module • Re: CM4 EMMC issue
Hi,Yes, I chose this option in CM Provision. If I uncheck this option, the size of EMMC will be resumed to 32GB? Or I need to perform any other procedure to clear the EMMC as factory default. Please...
View ArticleBeginners • how to configure the memory for mode (irq, fiq ..)
I am working with the Pico.While trying to configure the memory for the Pico, I became curious about the memory allocation sizes for the operating modes.I am wondering how much memory is allocated for...
View Article